How To Connect the DVD Maker USB2.0 to your VCR and PC

The longer cables on one end of the DVD Maker USB2.0 are to be connected to your computer.
Connect the USB cable to a USB port on your PC and connect the Audio Jack to the Audio Input port of your PC.

Now to the other end of the DVD Maker USB2.0 there are some shorter cables with 4 plugs.
A yellow plug,
A White plug,
A Red plug
and A Black plug.

Using your RCA cables that you would usually use to connect your VCR to your television, connect the VCR to the DVD Maker USB2.0.

There is no need to plug anything into the Black cable if you are using the RCA cable.
All you need to do now is to install the drivers for this hardware.
Locate the PlusTV Driver, user manual and utilities disk in the DVD Maker box and insert this into your computers CD drive or DVD drive.

Select “Driver Installation and follow the on-screen instructions.

Once the driver installation is complete, restart your computer and you are ready to begin using the DVD Maker USB 2.0 with GoldenVideos.

Back to Golden Videos Technical Support